beeCam LightMeter

Sponsored Links:
Application Screenshot:
beeCam LightMeter
Application Details:
Version: 1.0
Upload Date: 24 Feb 12
Developer: FM.Bee Corp.
Distribution Type: Freeware
Downloads: 19
Size: 131 Kb

Rating: 2.0/5 (Total Votes: 1)

Sponsored Links:

beeCam LightMeter - beeCam LightMeter is a incident-light meter application.
This app can measure the exposure without influence of the reflectivity of subject.
The accuracy of measurements depends on the sensor of your phone.
This app can also calculate f-stop or shutter speed by using manually inputted illuminance or EV.

The following model is a model that CAN retrieve the value of illuminance sensor confirmed by the user's review.
Nexus S, Nexus One, REGZA Phone IS04,
HTC EVO,HTC WILDFIRE, Motorola Droid 2 Global,
Motorola DEFY, Samsung Galaxy S2(SC-02C),
Samsung Galaxy_Tab(SC-01C), LYNX 3D SH-03C,
Dell Streak, DELL Streak SoftBank 001DL,
Garmin A50, MEDIAS N-04C,SHARP IS03,
iida INFOBAR A01,G'zOne(IS11CA)

The following model is a model that CAN NOT retrieve the value of illuminance sensor confirmed by the user's review.
HTC Legend, HTC Desire, Samsung Galaxy S,
Samsung Galaxy S2?, Samsung Galaxy Ace,
Motorola Milestone, Milestone2, Motorola CLIQ,
Motorola ATRIX(Gingerbread Version),
Xperia acro, Xperia Arc, Xperia SO-01B,
myTouch slide, SHARP IS01, LG P500

Please see instructions here!

Measurement procedure
(1) The application program is started.
(2) From the screen, tap the "START" button.
(3) Smartphone put in front of the subject.
(Please toward for the camera side where the illuminance sensor is used to take a picture. )
(4) Tap the "STOP" button.
(5) When the ISO sensitivity is set, tap the "ISO" button .
The ISO setting screen is displayed.
Please select the ISO sensitivity.
[For aperture priority]
To calculate the shutter speed, tap the "F" button.
A set screen of F value is displayed. Please select F value.
[For shutter speed priority]
To calculate F value, the "T" button is pushed.
A set screen of the shutter speed is displayed.
Please select the shutter speed.
(7) From the screen, get The ISO, F value and the shutter speed, and set in the camera.

・The illuminance sensor is installed on the liquid crystal screen side of the terminal.
・In the terminal that cannot use the illuminance sensor, the "INPUT" button is displayed instead of the "START" button.
Tap the "INPUT" button, the illuminance setting screen is displayed.
Please specify the illuminance corresponding to the situation.
The ISO, F value and the shutter speed are calculated by the specified illuminance.
・When click the menu key to the termina, the menu is displayed under the screen.
In "Setting" menu, it is possible to set it as follows.
Select light values:
Select useing sensor or manual input.
Sensor correction:
Input the correction value of the illuminance sensor.
Select same the steps as the camera used to take a picture.
・The light sensor may not get the terminal does not change the brightness and intensity.
In that case, please read after covering with the hand and darkening the sensor once and apply light.
・The light sensors may take some time to get light.

Like it? Share us with your friends

Supported Operation Systems

Similar Apps

Fractal (Android)
Fractal (Android)

20 Mar 13

FaceInCard Pro
FaceInCard Pro

26 Mar 13

Demotivators Maker
Demotivators Maker

25 May 12

Oh My Gif!
Oh My Gif!

9 Mar 13

Comments to beeCam LightMeter

Comments not found
Add Comment
Turn on images!
Search by Device
My Device